DIY Projector Mount Ideas: Which Ones Work for You Best?

If you don’t want your home office or home cinema to end up cluttered and stuffy this pandemic lockdown, you should build a ceiling or wall mount for your projector on your own without the assistance of the pros.

It’ll help you secure the space around the projector so that you can use the extra real estate for your work-at-home or home theater requirements.

Read more: 

If you’re an experienced Do-It-Yourself (DIY) type of guy, there are several ways you can go about in sensibly mounting your brand-new home theater projector that won’t break your budget. Keep on reading to find out all sorts of DIY Projector Mount Ideas you can try out!

Which DIY Projector Mount Idea Works the Best for You?

We’ve put together a few DIY project mount ideas for you to peruse and try out for yourself. Indeed, there are loads of excellent DIY projector mount projects to choose from in order to properly mount your display device.

Many of these ideas are easy to make and cheap to buy materials for. Just adjust them in accordance to your needs and home structure. Use common sense measurements when making a mount fit for your newest projector.

For example, make sure that the projector is setting at the right throw distance relative to your wall or screen for the best results. You should also take into consideration where your projections screen is mounted as well.

Quick and Easy Projector Ceiling Mount Eye-Bolted to Joists

Here’s what you need to do in order to make your own DIY projector ceiling mount in a rather quick manner. You need materials like a drill press, tape measure, eye bolts, tap link connector, and eye screw to match the bolts.

From there measure the board.  Check to see if it’s a few inches wider and longer than the space down between the projector and the floor beam. Drill holes at the board’s every corner. The holes should be big enough for your eye bolts to fit.

Putting on the Eye Bolts on the DIY Mount

The bolts should also be placed at the exact distance between joists. Use a drill press to ensure perfect precision and that the hole is vertical when all is said and done.

Hold the board parallel to the joist then mark through the hole where the eye screw will be screwed. Drill holes in the joists for good measure.

Install the small eye screws then open the lap link connector using a pair of needle-nose pliers. Now join the eye bolt to the eye screws to finish the installation. It takes about 2 hours or more to finish this DIY project.

Affordable Projector Mount Using Home Depot Materials

You can get most of the materials for this projector mount from home depot. Also get constant torque position control hinges, scrap plastic or wood, hand saw, pipe, and drill for good measure.

To get the best results, mark the position of the mounting holes on a sheet of plastic or a screwed metal board. Ensure there’s enough free space between the projector and the board.

This allows you easy passage of the heat emanating from your projector. It vents the heat because if it’s too constricted the device tends to heat up easily.

Installing the Pipe to the Floor Flange

To mount the hinges, drill two holes on one end of the pipe. Afterwards, drill the holes at the mount board’s center then attach to the board the hinges. Install the pipe to the floor flange then set the projector’s direction at this stage.

Uninstall the flange on the ceiling and mark the mounting hole position. Install the flange to the ceiling once more using screws and drywall anchors. The affordable projector ceiling mount is now fully prepped for use.

DIY Projector Mount Using Plywood

As for the DIY plywood projector mount, it’s composed of 4 main parts—two side pieces and one piece to hold other projector components such as cables or streaming media sticks and one main piece to hold and mount the projector itself.

Regarding the two side pieces, they should serve as notches holding the platform in a snug manner. You can make these notches through methods like an aluminum profile, hand mill, or CNC router.

Attaching the Main Plywood to the Notches

Attach the platform or main plywood part unto the notches for the projector to sit on. As for the upper notches on the other side pieces, these are attached to the ceiling instead.

Check if there’s space between the projector and the platform. This allows easy heat passage for venting. What’s more, accurate measurement is required when positioning your display device at the right dimension.

PVC Bracket or Hanger Installed onto the Ceiling

You need PVC pipe in order to make a ceiling-mounted projector bracket or hanger. The materials required include superglue, cable ties, ½ inch thread male adapter, ¾ inch PVC tee, and ¾ inch 90° PVC elbow.

A PVC cutting tool is also required to cut the PVC pipes into 23/6-inch pieces, a 2¾-inch pipe, a 10-inch piece, and a 1-inch piece. Slide the ¾-inch pieces into the tee fittings before sticking them there using superglue.

Make a Square Shape with the Four Elbow Fittings

Afterwards, make a square shape by taking the four elbow fittings and gluing them together for good measure. Glue the inch-sized piece into the tee fittings then screw the floor flange fitting unto the ceiling.

Also, thread the PVC bracket unto it. This results in an ultimately simple yet cool DIY hanger made of PVC pipes. The piping gives even this DIY bracket a professional look, like it’s part of your ceiling plumbing or construction.

Issues to Take Note

You can be quite creative when it comes to making ceiling or wall mounts for your projector. You can also keep it simple and use a shelf as your freestanding projector mount. You can even err on the side of caution and have the pros build the installation for you when push comes to shove.

Sometimes, the money you could save from them would instead go to fixing damages from your half-baked ceiling or wall mount. You also have some leeway when making a permanent fixture mount in terms of corrective measures like keystone correction, lens shift, and zoom.


  1. 11 DIY Projector Ceiling Mount Ideas For Every Home“,, Retrieved July 16, 2021

James Core

I love my projector system and I am here to help you find the right projector for your needs.

Recent Posts